Filter
Top Products
About the CD-ROM included with the AW1600
211
AW1600 Owner’s Manual
Appendix
In order to restore the internal hard disk to the factory-set
condition, you will need to perform the following two pro-
cedures.
A Initialize the internal hard disk
B Load the demo song and sample library
Initialize the internal hard disk. (→ p. 168)
When you initialize the internal hard disk, the system set-
tings will return to their factory-set state.
You can load the demo song and sample library from the
included CD-ROM to restore the AW1600 to its factory-
set condition.
1
Insert the included CD-ROM into the CD-RW
drive of the AW1600.
2
In the Work Navigate section, repeatedly
press the [CD] key to access the CD screen
RESTORE page.
3
Make sure that the cursor is located at the
READ CD INFO button, and press the
[ENTER] key.
Loading from the CD-ROM will begin. When loading
is finished, the contents of the display will change as
follows.
4
Move the cursor to the DISABLE button and
press the [ENTER] key.
The DISABLE button will change to ENABLE, and
the symbol at the right of the list will change to ●.
5
Move the cursor to the PAD button and press
the [ENTER] key.
Once again, loading from the CD-ROM will begin.
When loading is finished, the contents of the display
will change as follows.
6
Move the cursor to the ALL button and press
the [ENTER] key.
7
Move the cursor to the DISABLE button and
press the [ENTER] key.
The DISPLAY button will change to ENABLE, and all
symbols at the right of the list will change to ●.
This selects all songs and sample libraries.
8
Move the cursor to the EXECUTE button and
press the [ENTER] key.
9
A popup window will ask you for confirma-
tion, so move the cursor to the OK button or
CANCEL button, and press the [ENTER] key.
While the Restore operation is being executed, the
state of progress will be shown in a popup window.
When this popup window closes, the operation has
been completed.
• Windows
• Logic Platinum 5.5.1
(*1)
• Cubase SX 3.0.1
• Nuendo 3.0.1
• Sonar 4.0.1 Producer Edition
• Macintosh
• Logic Pro 7.0.1
(*1)
• Cubase SX 3.0.1
• Nuendo 3.0.1
• Protools TDM 6.7
(*2)
*1 Use the setting file from the included CD-ROM to map the
AW1600’s faders/[TRACK SEL] keys/transport keys to the
Logic key commands. Track assignments must be made
within Logic as appropriate for your system.
*2 Select the CS-10 settings as the MIDI controller type. For
details on the CS-10 settings, ask Digidesign.
Restoring the internal hard disk to the
factory-set condition
■ Initializing the internal hard disk
•Executing this operation will erase all data from the internal hard
disk, and the data cannot be recovered. We recommend you to
backup all data on the internal hard disk to a computer before exe-
cuting this operation.
NOTE
■ Loading the demo song and sample library
Installing a remote file
■ Supported DAW software