Filter
Top Products
Effects Parameters
199
AW1600 Owner’s Manual
Appendix
■ DIST->DELAY
■ MULTI FILTER
Parameter Range Description
DST TYPE DST1, DST2, OVD1, OVD2,
CRUNCH
Distortion type (DST = distortion, OVD = overdrive)
DRIVE 0 – 100 Distortion drive
MASTER 0 – 100 Master volume
TONE –10 to +10 Tone control
N.GATE 0 – 20 Noise reduction
DELAY 0.0 – 2725.0 ms Delay time
FB.GAIN –99 to +99% Feedback gain (plus values for normal-phase feedback, minus values for reverse-phase feedback)
HI.RATIO 0.1 – 1.0 High-frequency feedback ratio
FREQ. 0.05 – 40.00 Hz Modulation speed
DEPTH 0 – 100% Modulation depth
DLY BAL 0 – 100% Distortion and delay balance (0% = distortion, 100% = delayed distortion)
MIX BAL. 0 – 100 [%] Mix balance of the effects and dry sounds
Parameter Range Description
TYPE 1 HPF, LPF, BPF Filter 1 type: low pass, high pass, band pass
TYPE 2 HPF, LPF, BPF Filter 2 type: low pass, high pass, band pass
TYPE 3 HPF, LPF, BPF Filter 3 type: low pass, high pass, band pass
FREQ. 1 28 Hz – 16.0 kHz Filter 1 frequency
FREQ. 2 28 Hz – 16.0 kHz Filter 2 frequency
FREQ. 3 28 Hz – 16.0 kHz Filter 3 frequency
LEVEL 1 0 – 100 Filter 1 level
LEVEL 2 0 – 100 Filter 2 level
LEVEL 3 0 – 100 Filter 3 level
RESO. 1 0 – 20 Filter 1 resonance
RESO. 2 0 – 20 Filter 2 resonance
RESO. 3 0 – 20 Filter 3 resonance
MIX BAL. 0 – 100 [%] Mix balance of the effects and dry sounds