Filter
Top Products
64
Multi Mode
13-1. PEGIntL (PEG Initial Level)
13-2. PEGAtkTm (PEG Attack Time)
13-3. PEGRelL (PEG Release Level)
13-4.
PEGRelTm (PEG Release Time)
You can set PEG (Pitch Envelope Generator)
Parameters for each Part. There are four parameters
that control how the pitch changes from the moment a
note is pressed on the keyboard to the moment it is
released or the point at which the level has faded to
zero.
❏ Settings: –64 ~ +63
■ PEGIntL
Determines the initial pitch, or the pitch that sounds
the moment the key is played.
■ PEGAtkTm
Determines the time it takes after you play the key
for the pitch to return to normal (or original), from
the pitch set in PEG Initial Level above.
■ PEGRelL
Determines the final pitch that is reached after you
release your finger from the key.
■ PEGRelTm
Determines the time it takes for the pitch to reach
the setting made in PEG Release Level above, from
when you release your finger from the key.
14-1. Vib Rate (Vibrato Rate)
14-2. Vib Depth (Vibrato Depth)
14-3. Vib Delay (Vibrato Delay)
❏ Settings: –64 ~ +63
■ Vib Rate
Determines the speed of pitch modulation.
■ Vib Depth
Determines the depth or degree of pitch modulation.
n This Parameter is not available for Drum Parts.
■ Vib Delay
Determines the amount of time that elapses from
when a key is played to when the Vibrato effect
starts. The higher the value, the longer the delay
before the onset of the Vibrato effect.
n The Parameter is not available for Drum Parts.
PEGInitL
+00
KEYELEMPAR T
OCTAVE
PAG E
13
1
PEGAtkTm
+00
KEYELEMPAR T
OCTAVE
PAG E
13
1
PEGRelTm
+00
KEYELEMPAR T
OCTAVE
PAG E
13
1
PEGRelL
+00
KEYELEMPAR T
OCTAVE
PAG E
13
1
Key off
Key on
Normal Pitch
Time
PEG
Attack
Time
PEG Initial Level
PEG
Release
Time
PEG Release Level
Vib Rate
+00
KEYELEMPAR T
OCTAVE
PAG E
14
1
Vib Depth
+00
KEYELEMPAR T
OCTAVE
PAG E
14
1
Vib Delay
+00
KEYELEMPAR T
OCTAVE
PAG E
14
Time
Rate
Key on
Delay
Depth
Part Tone