Filter
Top Products
9
Basics Section
9
DATA buttons (Page 30)
These are used during editing for selecting various
pages and for setting parameter values.
9
-1 [DEC/NO] button (Page 31)
Use this to decrease the value of the selected
parameter. To decrease the value by 10,
simultaneously hold down this button and press the
[INC/YES] button. The button can also be used to
cancel a Job or Store operation.
9
-2 [INC/YES] button (Page 31)
Use this to increase the value of the selected
parameter. To increase the value by 10,
simultaneously hold down this button and press the
[DEC/NO] button. The button can also be used to
execute a Job or Store operation.
9
-3 [
▲
]/[
▼
] buttons (Page 30)
Use these to select the screen “pages” in each Mode.
9-4 [E]/[F] buttons (Page 30)
Use these to select the value to be set in the LCD, or
to display continuous parts of the page (on the left
and right), for pages that consist of several parts.
) [CATEGORY SEARCH/DRUM] button
(Pages 34, 35)
Turns on the Category Search function (page 35).
This function allows you to instantly select a
desired Voice category from the numeric keypad or
the Memory buttons. You can also assign the drum
bank of each memory by simultaneously pressing
this button and the [USER/(SE)] button or the
[GM/XG /(OTHER)] button.
! [PRESET/(DRUM/PERC)] button (Page 33)
In the Multi and Voice modes, this lets you select
the Preset Memory programs. When the Category
Search function (page 35) is active, this is used to
specify the DRUM/PERC Voice category.
@ [USER/(SE)] button (Page 33)
In the Multi and Voice modes, this lets you select
the User Memory programs. You can also specify a
User Memory Drum bank by simultaneously
pressing both this button and the [CATEGORY
SEARCH/DRUM] button. When the Category
Search function (page 35) is active, this is used to
specify the SE Voice category.
# [GM/XG/(OTHER)] button (Page 33)
In the Multi and Voice modes, this lets you select
the GM/XG Memory programs. You can also
specify a GM/XG Memory Drum bank by
simultaneously pressing both this button and the
[CATEGORY SEARCH/DRUM] button. When the
Category Search function (page 35) is active, this is
used to specify the OTHER: CO, ME Voice
categories.
$ Numeric keypad (Pages 32, 35)
This is used to select specific Multi or Program
numbers. In the Edit mode, it is used to input
parameter data values. The selected value is actually
entered or executed only after pressing the
[ENTER] button. This is also used to select the
various Voice categories (page 70) when the
Category Search function (page 35) is set to ON.
% [ENTER/KEYBOARD] button
This is used to enter or execute the value typed in
from the numeric keypad. This can also be used to
set parameters whose values are expressed as a note
(from C-2 - G8); simultaneously hold this button
and press the desired key on the keyboard. It is also
used for executing various jobs and store
operations.
& [EXIT] button (Page 31)
During editing or when in a mode other than Multi/
Voice Play, pressing this button exits from the mode
and returns to the Multi/Voice Play mode.