Filter
Top Products
92
Utility Mode
7. AC1 CC No
(AC1 Control Change Number)
In the Voice mode, this determines which Control
Change number is assigned to the AC1 (Assignable
Controller 1).
❏
Settings: 0~95
n For details about Assignable Controller 1, see page 66.
n The AC1 CC No parameter in the Multi mode is set in
the Multi Part Edit mode (page 66).
8. V EfBypass (Voice Effect Bypass)
This determines whether or not effects in the Voice
Mode can be bypassed. Only System effects can be
bypassed.
❏
Settings: off (not bypassed), on
Utility Job
In the Utility Job mode, you can restore your
synthesizer’s factory default settings of the S03
(Factory Set).
Factory Set (Restore
Factory Defaults)
This lets you restore the synthesizer’s default Internal
Voices (User Memory) and Multis, as well as its System
and other settings.
Once you edit any settings, the corresponding factory
defaults will be overwritten and lost.
Use the procedure below to restore the factory default
settings.
When you restore the factory default settings, all the
current settings for the all the Multis and User Voices
will be overwritten with the factory defaults. Make sure
you are not overwriting any important data. You should
back up any important data to your computer or to some
external device beforehand.
1Press the [JOB] button in Utility Mode. The Factory
Set display appears.
2Press the [ENTER] button. A confirmation message
appears.
3Press the [INC/YES] button to execute the Factory
Set job. After the job has been completed, a
“Completed!” message appears. To cancel a job
while it is being executed, press the [DEC/NO]
button.
4Press the [EXIT] button to return to the Utility
mode.
AC1 CC No
00
KEYELEMPAR T
OCTAVE
PAG E
7
V EfBypass
off
KEYELEMPAR T
OCTAVE
PAG E
8
FactorySet
KEYELEMPAR T
OCTAVE
PAG E
1
MODE
MULTI
UTILITY
EDIT
COMPARE
JOB STORE
MIDI
VOICE DEMO
Controller/Effect