Cab Getting to Know Your Vehicle
– 14 –
Doors
Do not drive the vehicle if the doors are
not closed.
To open the vent window:
depress the sliding collar and push
handle A downwards.
To open the door:
pull handle B upwards.
To lock the door from the inside:
depress button C.
To open the door window:
turn the window crank D.
Both doors can be locked and unlocked
from the outside with the key.
Tilting the Cab
The cab is tilted and lowered hydrauli-
cally. The cab should only be tilted
while the vehicle is parked on level
ground.
WARNING! You can be seri-
ously injured by the cab if
you do not follow safety pre-
cautions. Whenever you
raise or lower the cab, or
when you work under the
cab, please remember the
following safety rules:
– Ensure that the area in front
of the cab is clear.
– Ensure that the vehicle tool
kit and hydraulic jack are
secured in their stowed
positions.
– Ensure that there are no
loose objects in the cab.
– Ensure that the engine is
switched off, the parking
brake is applied, and the
shift lever is in neutral posi-
tion.
– Ensure that the cab tilt cylin-
der is fully extended before
attempting to work on the
vehicle.
PB1340A.book Page 14 Friday, September 1, 2000 7:40 AM
