Instruments and Controls Getting to Know Your Vehicle
– 45 –
Adjustable Steering Column
WARNING! Do not adjust the
steering column while the
vehicle is in motion, it could
cause loss of control. You
would not be able to steer
properly and could have an
accident. Make all adjust-
ments to the steering col-
umn while the vehicle is
stopped.
Loosen the locking control and move
the steering wheel forward or rearward
to the required position; ensure that the
locking control is tightened and that the
steering column is locked in position
before attempting to drive the vehicle.
Multi-function Switch, Left
Headlight flash, low beam, high
beam
Position H: rest position.
Position I: lift against spring pressure =
headlight flash.
Position J: position for switching
between low beam or high beam.
The lever always returns to position H
when it is released.
Turn Signals
The lane-change mode of the turn sig-
nals is operated by keeping the lever
pushed in against spring pressure. The
turn signals work only with the ignition
switched on.
Position L:
turn signals, left
Position H:
rest position
Position R:
turn signals, right
Horn
The horn works when button K is
pushed in against spring pressure.
PB1340A.book Page 45 Friday, September 1, 2000 7:40 AM
