Cab Getting to Know Your Vehicle
– 16 –
instrument panel. This warning
light must remain extinguished
when the ignition is switched on.
Door Mirrors
This vehicle is equipped with electri-
cally heated door mirrors, a passenger-
side mirror and, dependent upon vehi-
cle specification, an auxiliary wide
angle mirror (electrically heated).
Mirror head attachment
When required, the attachment of the
door mirror head to the mirror arm can
be loosened (to aid adjustment) or tight-
ened (to secure in position) using the
following procedure:
• Using a suitable implement
inserted into the slot provided,
release the trim cover (1) and then
extract it from its slotted location in
the mirror head.
• As applicable, release/tighten the
mirror head retaining bolt (2) to 11
lb. ft. (15 Nm).
• When replacing the mirror head
trim cover, ensure that it is correctly
located within its slotted location
and then pushed firmly in to its
engaged position; no gaps must
exist between the trim cover (slot-
ted end) and mirror head.
Mirror arm fold positions
The mirror arms are held in position by
a detent located under the mirror arm
shroud. The detent is equipped with a
spring-loaded clutch to enable the mir-
PB1340A.book Page 16 Friday, September 1, 2000 7:40 AM
