Safety Precautions
– 1 –
GENERAL
Safety Precautions
The following list of safety
precautions against possi-
ble safety hazards is not
exhaustive and, therefore all
safety related workshop
practices and precautions
must be exercised.
General
Ensure all Warnings and Cautions
listed in this publication are strictly
adhered to. Always read carefully the
instructions printed on labels or
stamped on components and obey
them completely. Such instructions are
included for your health and safety; do
not disregard them.
Wear clean protective clothing or appa-
ratus when necessary.
Engine
Do not run engine in a confined space
or unventilated area or with a leaky
exhaust system. If the engine must be
run in a confined space ensure that an
exhaust extractor is used.
To prevent a possible fire risk, ensure
that the engine and its surrounding
areas are clean and free from leakages/
spillages of any inflammable liquids
(e.g. fuel oil, engine oil, etc.).
Cooling System
Do not attempt to remove the surge
tank filler cap while the engine is run-
ning or still hot.
Do not attempt to fill a hot engine with
cold coolant.
Do not fill the cooling system through
the pressure cap aperture.
PB1340A.book Page 1 Friday, September 1, 2000 7:40 AM
