Cab Getting to Know Your Vehicle
– 15 –
Tilting
• Ensure that all cab doors and cab
grille are closed and secure.
• Rotate the tilt pump spool valve pin
(A) to the up position.
• Using the pump handle from the
tool kit, operate the hydraulic tilt
pump until the cab attains its fully
tilted position.
NOTE: The cab is secured in
the down position by hydrauli-
cally operated mounting locks;
operation of the tilt pump will
automatically disengage the
mounting locks.
Lowering
• Ensure that all personnel are
standing clear and that there are no
obstructions that would impede the
lowering of the cab.
• Ensure that the shift lever is in the
neutral position.
• Rotate the tilt pump spool valve pin
(A) to the down position.
• Operate the hydraulic tilt pump until
the cab is fully lowered and the cab
mounting locks have automatically
engaged. Ensure that the spool
valve pin remains in the down posi-
tion while the vehicle is in service.
• Check that the cab is correctly
secured by both cab mounting
locks. This condition is shown by
the lock-down warning light on the
PB1340A.book Page 15 Friday, September 1, 2000 7:40 AM
