General Periodical maintenance
– 72 –
Maintenance and Lubrication
Intervals
Table 1, ”Recommended Maintenance
Intervals”, shows service intervals for
normal pick-up and delivery operations.
For all other applications, see your
dealer for intervals.
NOTE: Different lubricants or
service intervals than those
listed below may be required.
Table 1 Recommended Maintenance Intervals
ITEM
MILEAGE INTERVAL (miles)
/TIME INTERVAL (Which-
ever Occurs First)
COMMENTS
Engine Lubricating Oil
-Check Fluid Level
See Engine Manufacturer’s Specifications and Recom-
mendations
-Change Oil, Oil Filter Per Engine Manufacturer’s Specifications and Recom-
mendations
Clutch Inspect and Adjust Per
Manufacturer’s Specifications
7500 / 3 mos
w/ Eaton SAS 1401 Clutch
Clutch Release Bearing 7500 / 3 mos
Clutch Cross Shaft 7500 / 3 mos
Drivelines:
City applications #
7500 / 3 mos
Grease Yokes and Slip Splines if lubrication zerks are
provided
On-Highway applications## 15,000 / 3 mos
Grease Yokes and Slip Splines if lubrication zerks are
provided
PB1340A.book Page 72 Friday, September 1, 2000 7:40 AM
