Filter
Top Products
ARTURIA – MOOG MODULAR V 2.6 – USER’S MANUAL 139
The pink noise output is filtered by a low pass filter (6 dB/oct) and directed to the sample &
hold audio in. The audio out of the latter is connected to one of the 3 cut-off frequency
modulation inputs of the low pass filter.
The result is random changes to the filter cut-off frequency.
Now set the modulation rate by turning the “Clock rate” knob on the Sample and Hold
module.
By setting the filter cut-off frequency on the “Noise” module, the high-pitched
frequencies will be filtered. The variations in modulation will be “softened” in this
manner.
By using the “Glide” knob on the “Sample and Hold” module, these modulation If you want
to soften these variations there are two solutions:
variations will be smoother.
The new modules included with the Moog Modular V 2.0 will add a large number of editing
possibilities. They were difficult to create (impossible in some cases) before. Don’t hesitate to
experiment in new editing methods.