Filter
Top Products
ARTURIA – MOOG MODULAR V 2.6 – USER’S MANUAL 49
The connection of modulation inputs of filter1 to the 2D controller
Return to the second screen and manipulate the 2D controller handle vertically (X) or
horizontally (Y) to hear the result of the modulation.
Using the 2D controller
To have access to these 2 modulation inputs on a low-pass resonant, it is essential to change the filter type (the
low-pass 24dB Moog does not possess a modulation input in the resonance.) Take the multimode filter and set it to
low-pass mode, if it isn’t already the case.
5.5.4.3 The filter cutoff frequency controller
On the right of the 2D Pads you will find controls for the cutoff of the 3 filters modules
These will only be active if the filters are used in the current sound (a diode above each knob
indicates if it is active)
In our (“Stereo pad”) example the first two filters are used, you will notice that the first 2
knobs are active.
Simply try to change the settings and you will immediately hear the result on your sound.