Filter
Top Products
46 ARTURIA – MOOG MODULAR V 2.6 – USER’S MANUAL
The pitch bend and modulation dials are also available for height (affected to the oscillator or
filters) and modulation settings (affected to any of the synthesizers modulation sources). The
connections are made by cables on the first screen.
5.5.2 The keyboard controllers
The different settings concerning the real time controllers affected to the keyboard can be
found on the left, above the virtual keyboard.
Here you will find all of the settings applied to the 4 key followers, the pitch bend and
modulation wheels, as well as velocity and aftertouch.
Before using them, go back to the module section to define the parameters, which will be
modulated by these controllers. The connection jacks are found underneath the modular
synthesizer section.
The controller connection jacks
For this example, let’s take the “stereo_pad” sound created earlier. Connect the output of
the modulation dial “mod” (at the bottom of this section) to the filter1 cut-off frequency
modulation input. Set the amount parameter of this modulation to your liking so that it can
be taken into account by the wheel. Now test by turning the dial on your MIDI keyboard or
the virtual keyboard.
Connections for modulation and velocity outputs on the frequency modulation of filters 1 and 2
Now do the same thing, connecting the velocity output (“vel”) to the filter2 cut-off
frequency modulation input. To test velocity settings, use your MIDI keyboard, the virtual
keyboard naturally is not sensitive to velocity.