Filter
Top Products
ARTURIA – MOOG MODULAR V 2.6 – USER’S MANUAL 141
10.1.2.2 Configuring Knob Mode
This combo box sets how the knobs respond to mouse movements: either in “Circular” mode
(you have to turn around them with the mouse) or in easier “Linear” mode (moving the mouse
vertically rotates the knobs).
10.1.2.3 Panic
There are times when the software can not receive a MIDI note off message from a controller.
The PANIC button will send a MIDI message to the instrument to cut off all notes that haven’t
stopped.
Click on the “Panic” button to solve this problem.
10.1.2.4 Information on rate of processor use
The processor usage gauge lets you monitor the processor power dedicated to sound synthesis
in real time. This gauge is directly visible in the instruments tool bar.
Attention: this information only corresponds to the processor load dedicated to sound synthesis, it is therefore inferior
to the global system load.
10.2 U
SING YOUR PLUG
-
IN IN A HOST
10.2.1 MIDI connection
Before using your plug-in with a host, please check that the MIDI connection between your
computer and the MIDI device is operational. It can be verified by playing in Standalone mode
with the appropriate direct MIDI routing to the application.
There is an alternative way to check the MIDI connection: On Windows, the MIDIOx software can be use to see the
MIDI Data travelling on your devices. On Macintosh: MIDI Monitor
10.2.2 Saving preset
When the session is recorded, the state of the Moog Modular V is recorded as is, even if the
programming does not correspond to any preset. For example, if you were working on preset
“P1” on which you had modified the parameters (without having saved them under the name
“P2”), the next time the song is opened, the Moog Modular V will load preset “P1” with the
modifications.
The drop down menu offered by the VST sequencer to save plug-in settings can of course be
used with the Moog Modular V. Nevertheless, it is strongly recommended that you use the
internal Moog Modular V menu: the presets saved in this manner can be used in any other
mode (standalone or other sequencer), and can be exported as a unique file.
10.2.3 Automation
Automation works with the Moog Modular V as like any other VST plug-in (refer to the VST
sequencer documentation for more information on the automation of plug-ins). Preset
changing (and therefore cable changing) cannot be automated.