Filter
Top Products
Using the Softkeys to Activate a Feature
Your display and softkeys allow you to access up to 12 switch-related features. For
example, you may want to use the Priority Calling feature to call another extension
with a distinctive 3-burst ring. You can activate this feature with the softkeys in the
following way:
To access a feature with
1 Press [
Menu ]
the softkeys (Priority
Calling is used in this
●
The display shows the initial feature option
screen:
example)
LWC CnLWC AutCB Timer
2 Press [ Next → → ]
● The display shows:
CFrwd CPark DayTm PCall
3 To use the Priority Calling feature, press the softkey
below PCall and then dial extension
Note: When the feature is activated, after the
display screen shows you the digits you are dialing,
an arrow appears above the feature, as in the
example below. If there is not an arrow above the
feature, the feature is off.
▼
CFrwd CPark DayTm PCall
When the both parties hang up from the call, the
arrow above PCall (showing feature status
indication) disappears.
14