Filter
Top Products
Speakerphone
Note: If you are uncertain whether your voice terminal is set for the Speaker
(listen-only) feature or the Speakerphone (listen and talk) feature, check with your
system manager.
Use the following procedures if your voice terminal is set for the Speakerphone
(speak and listen) feature.
For directions on using the Reset Speakerphone feature, see "Reset Speakerphone"
in this section.
To place/answer a call
without lifting the
handset, or to use
speakerphone with any
feature
1
2
3
Press [
Speaker ]
●
Red light next to [ Speaker ] goes on steadily
Place or answer call, or access selected feature
Adjust speakerphone volume if necessary
●
●
To raise the volume, press the right half of the
Volume control button labeled [
∧ ] ;
to lower the volume, press the left half of the
Volume control button labeled [
∨ ]
If you have a display, it shows
SPEAKER L>>>>> H
(There are eight possible volume settings. On the
display, one arrow is the lowest setting, and eight
arrows is the highest setting)
Note: The Volume control does not affect an external
speakerphone attached to your voice terminal.
To prevent the other
party from hearing you
Note: If the Speakerphone feature is not active, the
Mute feature turns off the microphone associated with
the handset (not the speakerphone). However, if the
speakerphone is active and the handset is not active,
then the Mute feature turns off the microphone
associated with the speakerphone (not the handset).
1
2
Press [
Mute ]
● Red light goes on and other party cannot hear
you
Press [
Mute ] again to resume talking to party
● Red light goes off and other party can hear you
again
36