Filter
Top Products
5
6
7
8
Dial list item (1, 2, 3...)
[dial tone]
Dial number you want to store (up to 24 digits)
Note: If your 8410 has a display, you may be able to
use the softkeys to add special features such as
Pause, Mark, or Wait into the telephone numbers
programmed on the AD button.
If you are programming an outside number, be sure
to include a trunk code, if applicable.
Press [
# ]
●
●
Number is stored
[confirmation tone]
Repeat Steps 5 through 7 if you want to program
additional items on the same list; press [
Drop ]
and begin again at Step 1 if you want to program
items on another list
Hang up or press [
Drop ] to end programming
Note: Record your personal list items on the
Abbreviated Dialing list in the back of this guide;
group, system, and enhanced lists can be obtained
from your system manager.
To place a call using an
1
Press [
Pers List ] or [ Grp List ] or [ Sys List ]
AD list button or code
or Dial appropriate AD List code:
●
List 1
● List 2
[dial tone]
●
List 3
Note: An [
Enhcd List ] may also be available; see your
2
system manager.
Dial desired list item (1, 2, 3...)
●
Call is automatically dialed
[ringback tone]
18