Filter
Top Products
To answer any
intercom call
1
●
Last Number Dialed
1
If you are using an 8410 with a display, press [
Menu ]
and then press the softkey below Last
(while on-hook or off-hook)
If your 8410 does not have a display or if Last is not
available on your display, press [
LastDialed ]
(while on-hook or off-hook)
or Dial Last Number Dialed access code
(while on-hook or off-hook)
Leave Word Calling (LWC)
Pick up handset
You are connected to call
Note: If you are active on another call, first press
[
Hold ] , then press flashing [ xxxxx ] . To return to
the held call, press [
xxxxx ] of the held call.
You can access this feature with the softkeys only if your voice teminal has a display
and if the feature’s abbreviation, Last, appears on the second line of one of the
feature option screens.
To automatically redial
the last number you
dialed (up to 24 digits)
(extension, outside
number, or trunk/feature
access code)
You can access the feature with the softkeys only if your voice terminal has a display
and if the feature’s abbreviation, LWC (for the Leave Word Calling feature) or
CnLWC (for the Cancel Leave Word Calling feature), appears on the second line of
one of the feature option screens.
To leave a message after
1
If you are using an 8410 with a display, press [
Menu ]
dialing an extension
and then press the softkey below LWC before
(when your call is not
hanging up your handset
answered, you hear a
If your 8410 does not have a display or if LWC is not
coverage or busy tone, or
available on your display, press [
LWC ] before
you have been put on
hanging up your handset
[confirmation tone]
hold)
●
Message light goes on at called voice terminal
(if so equipped)
Note: If reorder tone is heard, message is not
stored; try again.
27