Filter
Top Products
To leave a message
without ringing an
extension
1
2
3
If you are using an 8410 with a display, press [
Menu ]
and then press the softkey below LWC
(while on-hook or off-hook)
If your 8410 does not have a display or if LWC is not
available on your display, press [
LWC ]
(while on-hook or off-hook)
or
Dial Leave Word Calling access code
(while on-hook or off-hook)
[dial tone]
Dial extension
[confirmation tone]
●
Message light goes on at called voice terminal
(if so equipped)
Hang up or press [ Drop ]
To cancel a Leave Word
Calling message
Note: You cannot cancel
a message left for an
AUDIX subscriber.
1
2
If you are using an 8410 with a display, press [
Menu ]
and then press the softkey below CnLWC
(while on-hook or off-hook)
If your 8410 does not have a display or if CnLWC is
not available on your display, press [
Cancel LWC ]
(while on-hook or off-hook)
or Dial Leave Word Calling cancel code
(while on-hook or off-hook)
[dial tone]
Dial extension
[confirmation tone]
Note: If reorder tone is heard, message is not
canceled; try again.
Message
✔
To retrieve a message
1
If your set has a display, see the Message Retrieval
when your Message light
procedures under the Display Features
is on
Procedures heading. Otherwise, see your system
manager for instructions regarding your local
message retrieval procedures.
28