Filter
Top Products
To return a held call
1
Press [ xxxxx ] of held call
●
You are connected to held call
Note: If you are active on a call and you press the
[
xxxxx ] of the held call, the active call will be
dropped.
Intercom (Automatic/Dial)
You can access these feature with the softkeys only if your voice terminal has a
display and if the feature’s abbreviation, IAuto (for the Automatic Intercom feature),
or IDial (for the Dial Intercom feature) appears on the second line of one of the
To make a call to your
predetermined Automatic
Intercom partner
1
If you are using an 8410 with a display, press [
Menu ]
and then press the softkey below IAuto
(while off-hook)
feature option screens.
If your 8410 does not have a display or if IAuto is
not available on your display, press [
IcomAuto xxx
]
(while off-hook)
[ringback tone]
●
Special intercom ring is sent
Note: If call is unanswered, press [ Go to Cvr ] while
call is ringing if you want to redirect it to coverage.
To dial a call to a
1
member of your Dial
Intercom group
2
If you are using an 8410 with a display, press [
Menu ]
and then press the softkey below IDial
(while off-hook)
If your 8410 does not have a display or if IDial is not
available on your display, press [
IncomDial xxx
]
(while off-hook)
[dial tone]
●
Green light goes on steadily
Dial group member’s 1- or 2-digit code
[ringback tone]
●
Special intercom ring is sent
Note: If call is unanswered, press [
Go to Cvr ] while
call is ringing if you want to redirect it to coverage.
26