Filter
Top Products
To adjust ringer volume
if necessary (speaker is
not active)
1
To raise the volume, press the right half of the
Volume control button labeled [
∧ ] ;
to lower the volume, press the left half of the Volume
control button labeled [
∨ ]
●
If you have a display, it shows
RINGER L>>>>> H
(There are eight possible volume settings. On the
display, one arrow is the lowest setting, and eight
arrows is the highest setting)
One full ring cycle will sound to demonstrate the
new volume
Send All Calls
You can access this feature with the softkeys only if your voice terminal has a display
and if the feature’s abbreviation, SAC, appears on the second line of one of the
feature option screens.
To send all calls (except
priority calls)
immediately to coverage
(If your system manager
has provided a coverage
path for your extension)
1
If you are using an 8410 with a display, press [
Menu ]
and then press the softkey below SAC
(while on-hook)
If your 8410 does not have a display or if SAC is not
available on your display, press [
Send Calls ]
(while on-hook)
or Dial Send All Calls access code
(while on-hook)
[confirmation tone]
Note: You may hear a ring-ping tone from your
voice terminal as each call is forwarded.
33