Filter
Top Products
3
4
5
6
7
If you are using an 8410 with a display, press [
Menu ]
and then press the softkey below Prog
If your 8410 does not have a display or if Prog is not
available on your display, press [
Program ]
or Dial AD Program access code
[dial tone]
Press [ AD xxxxx ] to be programmed
[dial tone]
Dial outside number, extension, or feature access
code you want to store (up to 24 digits)
Note: If your 8410 has a display, you may be able to
use the softkeys to add special functions such as
Pause, Mark, or Wait into the telephone numbers
programmed on the AD button.
If you are programming an outside number, be sure
to include a trunk code, if applicable.
Press [
# ]
[confirmation tone]
●
●
Number is stored
Repeat Steps 4 through 6 to program additional
buttons
Hang up or press [
Drop ] to end programming
To place an AD call
1
Press selected [
AD xxxxx ]
[ringback tone]
2
Call is automatically dialed
To program/reprogram
an outside number,
extension, or feature
access code into a
personal list
1
2
3
4
On a separate sheet of paper, write down the outside
numbers, extensions, and/or feature access codes you
want to program as items on your personal lists(s)
Note: Each phone number or feature access code is
stored as a separate item.
Pick up handset
[dial tone]
Note: If you are using the built-in speakerphone,
you must either press a call appearance button or
press [
Speaker ] before you begin Step 3.
If you are using an 8410 with a display, press
[
Menu ] and then press the softkey below Prog
If your 8410 does not have a display or if Prog is not
available on your display, press [
Program ]
or Dial AD Program access code
[dial tone]
Dial Personal List number (1, 2, or 3)
[dial tone]
17