Filter
Top Products
Resetting the Speakerphone with the Softkeys
(When Powering Up the Voice Terminal)
When you first power up the voice terminal, the following display appears.
PLEASE RESET SPKR.
Begin
Cancel
When you set the speakerphone on your voice terminal, you hear a set of tones as the
speakerphone performs an acoustic test of the environment. When the tones stop,
your speakerphone has finished adjusting itself for optimal performance and is ready
for use. For more information about the Reset Speakerphone feature, see “Reset
Speakerphone” in the section Voice Feature Procedures later in this guide.
To reset the
1 Press the softkey below Begin to reset the
speakerphone (when the
speakerphone
voice terminal is first
(Press the softkey below Cancel if you do not want
powered up)
to reset the speakerphone at this time. However,
note that the red light next to [
Speaker ] will continue
to flutter.)
●
If you press the softkey below Begin, the display
shows the following timed screen:
OPTIMIZING PERFORMANCE
OF THE SPEAKERPHONE.
●
You will hear a set of rising tones as the
speakerphone adjusts itself to the surrounding
acoustical environment. These tones are
automatic. No user response is required.
15