Filter
Top Products
To use the Consult
1
Press [
Transfer ]
[dial tone]
feature to talk privately
Call is put on hold
with a coworker after
●
answering a redirected
2
If you are using an 8410 with a display, press [ Menu ]
call
and then press the softkey below Cnslt
If your 8410 does not have a display or if Cnslt is not
available on your display, press [
Consult ]
[priority ring to coworker]
or Dial coworker’s extension
Note: You can privately discuss call; if coworker is
not available, press the fluttering [
xxxxx ] to
reconnect to call.
3
Press [
Transfer ] again to send call to coworker
or Press [
Conf ] to make it a 3-party call
Call Forwarding All Calls
You can access this feature with the softkeys only if your voice terminal has a display
and if the feature’s abbreviation, CFrwd, appears on the second line of one of the
feature option screens.
To temporarily redirect
all calls to an extension
or outside number of your
choice
1
2
If you are using an 8410 with a display, press [
Menu ]
and then press the softkey below CFrwd
(while on-hook or off-hook)
If your 8410 does not have a display or if CFrwd is
not available on your display, press [
Call Fwd ]
(while on-hook or off-hook)
or Dial Call Forward access code
(while on-hook or off-hook)
[dial tone]
Note: If you have console permission, next, dial the
extension number whose calls are to be forwarded;
receive dial tone.
Dial extension or number where calls will be sent
[confirmation tone]
21