Filter
Top Products
41
Chapter 1 Before Composing Rhythm Patterns and Songs
Chapter
1
Drum Kit Edit mode
Used for making drum kit settings, assigning sounds to the key pads, and for setting the way
sounds are played.
To go into Drum Kit Edit mode, hold down [SHIFT] and press Key Pad 9 (DRUM KIT EDIT)
while the performance is stopped.
fig.01-07
DPP Assign mode
Used for assigning rhythm patterns to the key pads when the DPP (Direct Pattern Play)
function is used.
To go into DPP Assign mode, hold down [SHIFT] and press Key Pad 10 (DPP ASSIGN)
while the performance is stopped.
fig.01-08
Utility mode
Used for setting the output part, metronome, foot switches, rolls, flams, pad sensitivity, and
master tuning.
To go into Utility mode, hold down [SHIFT] and press Key Pad 13 (UTILITY) while the
performance is stopped.
fig.01-09
MIDI mode
Used for making settings to synchronize performances with the BR-8 or other external MIDI
devices. Also used for transmission and reception of the DR-670’s internal data with respect
to an external MIDI sequencer (Bulk function).
To go into MIDI mode, hold down [SHIFT] and press Key Pad 14 (MIDI) while the
performance is stopped.
fig.01-10
Demo mode
Used for playing the demo songs.
To go into Demo mode, hold down [SHIFT] and press Key Pad 4 (DEMO) while the
performance is stopped.
fig.01-11