Boss Audio Systems DR-670 Musical Instrument User Manual


 
64
Chapter 4 Recording and Editing Songs (Song Edit Mode)
<1>
Select an Unrecorded
Song
1. Switch to Song Edit mode.
With the performance stopped, press Key
Pad 2 (SONG EDIT).
* Continue to hold down [SHIFT].
fig.04-02a
2. Select the song.
Hold down [SHIFT] and rotate the TEMPO/
VALUE dial to select the song.
* You can also select the song by inputting the
number with the numerical keys and pressing
[].
The following appears in the display when
an unrecorded song (a song which contains
no data) is selected.
fig.04-03
3. Release [SHIFT].
You can also remove previously
recorded songs and use them for
recording new songs.
Refer to “Removing Unneeded Songs
(Song Clear)” (p. 70).
<2> Select the Tempo
(Initial Tempo)
This sets the initial tempo, the basic tempo used
to play the song.
1. Hold down [SHIFT] and press [VOICE]
(INIT TEMPO).
* Continue to hold down [SHIFT].
fig.04-04
2. While still holding down [SHIFT], rotate
the TEMPO/VALUE dial to select the initial
tempo.
When set to “OFF,” the song is played at the
tempo selected at the time.
3. Release [SHIFT].
* You can check the initial tempo settings in Song
Play mode.
Hold down [SHIFT] and press [VOICE] (INIT
TEMPO).
The initial tempo settings are displayed while
[SHIFT] is held down.
Holding down