Filter
Top Products
84
Chapter 8 Creating Your Own Favorite Drum Kits (Drum Kit Edit Mode)
Decay Time After Note Off (Release)
Valid Settings: -7– +7
fig.08-25
Positive (+) Values:
The release gets longer than the original
as the value increases.
0: Original nuance
Negative (-) Values:
The release gets shorter than the original
as the value increases.
fig.08-25a
■
Positioning the Sound (Pan)
This sets the placement of the sound, with seven
degrees of adjustment.
Valid Settings: L3–CNTR–R3
fig.08-26
fig.08-14
Copying Drum Kits
This copies the currently selected drum kit to
one of the User drum kits (65–128).
* If the drum kit you want to copy is not the one
that is currently selected, first select the drum kit
that you do want to copy before continuing.
1. Hold down [SHIFT] and press [4] (COPY).
* Continue to hold down [SHIFT].
fig.08-27
2. While holding down [SHIFT], rotate the
TEMPO/VALUE dial to select the copy-
destination drum kit.
* You cannot select 1–64 (the Preset drum kits).
3. If you are sure you want to copy the drum
kit, hold down [SHIFT] and press
[].
The drum kit copying process starts.
* To cancel the operation, release [SHIFT].
4. Once the copy has been completed, release
your finger from [SHIFT].
Level
Time
Note On Note Off
+–
CNTR R3L3 L1 R1
Copy source Copy destination