Boss Audio Systems DR-670 Musical Instrument User Manual


 
69
Chapter 4 Recording and Editing Songs (Song Edit Mode)
Chapter
4
Adding Patterns In the Song
(Insert)
This operation inserts a pattern at a point within
the song.
fig.04-08
* When the pattern to be inserted is two measures,
you cannot insert only one measure.
Furthermore, you cannot insert material between
the measures of a two-measure pattern being
recorded.
1. With the performance stopped, press [ ]
[ ] to specify the measure where
the pattern is to be inserted.
2.
Hold down [SHIFT] and press [1] (INSERT).
* Continue to hold down [SHIFT].
3. Select the pattern to insert.
Continue holding down [SHIFT] and rotate
the TEMPO/VALUE dial to select the
pattern number. Press [ ] to set
the number.
* You can also input the pattern number by
holding down [SHIFT] and pressing the numeric
keys. When you have decided on the pattern,
press [ ] to set the pattern.
The pattern is inserted, and when it is
finished the display will indicate “DONE.”
4. When the insertion is finished, release
[SHIFT].
* To cancel the operation, release [SHIFT].
Deleting Patterns
(Delete)
This deletes unneeded patterns from songs.
fig.04-09
1. With the performance stopped, press [ ]
[ ] to specify the measure to be
deleted.
2. Hold down [SHIFT] and press [2]
(DELETE).
* Continue to hold down [SHIFT].
3. While continuing to hold down [SHIFT],
press [ ].
The pattern is deleted, and when it is
finished the display will indicate “DONE.”
4. When the deletion is finished, release
[SHIFT].
* To cancel the deletion, release [SHIFT].
Pattern 1
A
1
measure
measure
2345678
12345678910
BABABAB
Pattern 2 Pattern 3 Pattern 4
Pattern 1
ABABABAB
Pattern 2 Pattern 5 Pattern 3
AB
Pattern 4
AB
Pattern 5
Insert
Pattern 1
ABABABAB
Pattern 2 Pattern 4 Pattern 5
Pattern 1
ABABABAB
Pattern 2 Pattern 3 Pattern 4
AB
Pattern 5
Delete
measure
measure
12345678910
12345678
Measure to be specified