50
Chapter 2 Playing Patterns (Pattern Play Mode)
Adjusting the Tempo
1. Hold down [TAP/TEMPO] and rotate the
TEMPO/VALUE dial to adjust the tempo.
You can adjust the tempo within the range
from 20 to 260.
fig.02-13
■
Adjusting the Tempo with
the Tap Tempo Function
You can set the tempo to the interval at which
[TAP TEMPO] is pressed.
1. Press [TAP TEMPO] at least three or four
times in a steady rhythm.
The tempo is set to the same timing you’ve
just used when tapping [TAP TEMPO].
You can adjust the tempo this way within
the range from 20 to 260.
fig.02-15
Inserting Fill-Ins
With the DR-670, you can add fill-in patterns at
any point in a pattern while the performance is
in progress.
Each pattern features a fill-in prepared for use
with that pattern. These fill-in patterns are called
“fill patterns,” whereas the original pattern on
which these are based are called “basic patterns.”
You can also create one fill-in pattern
for each of the User patterns.
For more details, refer to “Record the
Fill Pattern” (p. 59).
fig.02-16
■ Adding Fill-Ins While the
Pattern is Playing
By pressing [FILL] while the basic pattern is in
progress, you can go directly to the performance
of the fill pattern and insert the fill-in.
fig.02-19
1. Press [START] to start the performance of
the pattern.
fig.02-20
Basic
Pattern
Patterns
Fill
Pattern
Basic
Pattern
Basic
Pattern
Fill
Pattern
Basic
Pattern
Basic
Pattern