Filter
Top Products
66
Chapter 4 Recording and Editing Songs (Song Edit Mode)
■ Using the DPP Function in
Realtime Recording
1. Press [DPP]; “DPP” appears in the display.
fig.04-08a
2. With the song stopped, press the key pad to
which the first pattern to be recorded is
assigned.
3. Hold down [REC] and press [START] to
start recording.
The first selected pattern simultaneously
starts to play.
The tempo indicator flashes on each beat.
4. Press a key pad to select the next pattern to
be recorded.
* You can also select patterns by rotating the
TEMPO/VALUE dial or pressing the numeric
keys and [ ].
5. Repeat Step 4 as needed.
6. Press [STOP/CONT] to stop the recording.
■
Switching Recorded Patterns
* To switch the pattern in the first measure, select
the substitute pattern before carrying out Step 1.
1. Hold down [REC] and press [START] to
start Realtime Recording.
The prerecorded pattern starts to play.
The tempo indicator flashes on each beat.
2. When you reach the measure before the one
you want to substitute, select the next
pattern to be recorded.
Turn the TEMPO/VALUE dial to select the
pattern number.
* You can also select the pattern by inputting the
pattern number with the numeric keys and
pressing [ ].
◆ You cannot select with the key pads when
[DPP] is pressed and the DPP function is
turned on.
3. When you have finished recording the
replacement pattern, press [STOP/CONT]
to finish the recording.
* If no pattern number is entered as the replacement
pattern, then the pattern already recorded is played.
fig.04-08c
◆ You can replace the pattern being recorded
by pressing [FILL] during recording.
After the fill pattern is played to the end, the
recording returns to the basic pattern.
* Although the fill pattern is played when [FILL] is
pressed at the time of recording, the fill pattern is
played at the beginning of the pattern during playback.
Pattern 1
A
1234567
12345678
BABAAB
Pattern 2
Pattern
3
Pattern 4
Pattern 1
ABABABAB
Pattern 2 Pattern 5 Pattern 4
AB
Pattern 5
Input the Pattern Number
measure
measure