Filter
Top Products
17
Quick Guide
6
Using the pedals to turn each eect on/o (Manual mode)
1. Press simultaneously.
2. Use the pedals to turn each eect on/o.
On/o status
Pedal name
Eect name
Use the pedals to turn each eect on/o.
You can assign the
desired eects unit
to each pedal.
3. To exit Manual mode, press simultaneously once again.
* If PHRASE LOOP PEDAL FUNC (p. 32) is set to “PHRASE LOOP,” you won’t be able to assign anything other than PHRASE LOOP (“PL”) to the
[PHRASE LOOP] pedal. If you want to assign any other function, you must turn PHRASE LOOP PEDAL FUNC o.
Advanced: Manual Mode
This section explains more advanced uses of the GT-100.
What Is Manual Mode?
Manual mode lets you use the GT-100’s pedals to turn on/o
individual eects within a patch.
You can use this just as though you were individually switching
on/o several compact eects units in a pedalboard.
* In Manual mode, P.LOOP PEDAL and ACC/CTL PDL, which
can be assigned to ASSIGN 1--8 (p. 37) under ”Pedal Settings
(Control/Expression)” (p. 33), will be invalidated.
Quick Guide Overview Outputting Sound Eects Saving
Pedal Settings
System MIDI/USB Appendices