Pedal Settings (Control/Expression)
35
Quick Guide Overview Outputting Sound Eects Saving Pedal Settings System MIDI/USB Appendix
Assigning the [1]–[8] Knob
Functions in the Play Screen
Here’s how to assign the functions of the [1] – [8] knobs when they
are operated in the Play screen.
1. Press the [SYSTEM] button.
2. Turn knob [4] to select “KNOB SETTING”.
3. Use knobs [5]–[8] to select the functions of knobs [1]–[4].
4. Press the PAGE [ ] button to access the next page.
5. Use knobs [5]–[8] to select the functions of knobs [5]–[8].
Switching Settings with the Number
Pedals
The GT-100 includes a function that allows you to turn the tuner
on and o, switch preamp channels, and perform other tasks by
pressing the pedal with the same number as the currently selected
patch.
* You can switch the following functions in any condition other
than the Manual Mode (p. 17).
1. Press the [SYSTEM] button.
2. Turn knob [4] to select “PLAY OPTION.”
3. Use knob [8] to select the value for NUM PEDAL SW.
Value Explanation
OFF Not used.
TUNER Switches the tuner on and o.
Ch. A/B Switches between preamp channels A and B.
OD SOLO Switches to tones suited to solo performance.
A/B SOLO Switches the preamp SOLO on and o.
A&B SOLO Switches SOLO on or o for both preamp channels A and B.