Filter
Top Products
Making Global Settings (System Settings)
46
Parameter Value Explanation
SUB EXP OUT
Sending External Expression pedal Operations as Control Change
Messages
This sets the controller number when operation data from the expression pedal connected to the SUB CTL 1, 2/SUB EXP jack is output as Control
Change messages.
OFF Control Change messages are not output.
CC#1–CC#31, CC#64–CC#95
This sets the controller number when external SUB EXP Pedal operation data is output as Control
Change messages.
MIDI PROGRAM CHG MAP BANK 0–3
Parameter Value Explanation
PC#1–PC#128
Setting the Program Change Map
When switching patches using Program Change messages transmitted by an external MIDI device, you can freely set the correspondence between
Program Change messages received by the GT-100 and the patches to be switched to in the “Program Change Map.”
“Setting the Program Change Map” (p. 47)
U01-1–U50-4, P01-1–P50-4 This sets the patch number (U01-1 through P50-4) for the corresponding Program Change number.
MIDI BULK DUMP
Parameter Value Explanation
Transmitting Data to an External MIDI Device
You can use Exclusive messages to provide another GT-100 with identical settings, and save eect settings on a MIDI sequencer or other device
“Transmitting Data to an External MIDI Device (Bulk Dump)” (p. 48).
FROM
SYSTEM System parameter settings
QUICK Settings for User Quick Setting
U01-1–U50-4 Settings for Patch Number U01-1 through U50-4
TEMP Settings for the patch that is currently selected
TO
SYSTEM System parameter settings
QUICK Settings for User Quick Setting
U01-1–U50-4 Settings for Patch Number U01-1 through U50-4
TEMP Settings for the patch that is currently selected