Filter
Top Products
Panel Descriptions
21
Quick Guide Overview Outputting Sound Eects Saving
Pedal Settings
System MIDI/USB Appendices
About the Play Screen
The screen that appears after you turn on the power is called the Play screen.
Icons in the display
MASTER BPM
OUTPUT SELECT setting
PREAMP Channel
PHRASE LOOP on
Bank – Number
Left display
Right display
Icon Explanation
Displays the Master BPM (*1) value for each patch.
This is displayed when OUTPUT SELECT (p. 9) is set to anything other than LINE/PHONES.
This is displayed when OUTPUT SELECT (p. 9) is set to LINE/PHONES.
When the DIVIDER (p. 27) mode is Single, preamp channel “A” is selected.
When the DIVIDER (p. 27) mode is Single, preamp channel “B” is selected.
This is displayed if the DIVIDER (p. 27) mode is Dual.
, ,
This icon is highlighted if the SOLO SW (*1) is on.
This is displayed when the PHRASE LOOP (p. 18) is On.
*1 For the detail on the Master BPM and SOLO SW, download “GT-100 Parameter Guide” (PDF le) from “GT-100” in the “Owner’s Manuals” list on the Roland website (http://
www.roland.com/support/en/).
Types of Play screens
Screen with the patch name shown large
Amp control screen (Ch. A)
Amp control screen (Ch. B)
Eect on/o status indication screen
If DIVIDER (p. 27) is set to
SINGLE, only the screen of the
currently selected channel
(not both channels) will be
shown.
Use the PAGE [ ][ ] buttons to switch.
The explanations in this manual include illustrations that depict what
should typically be shown by the display.
Note, however, that your unit may incorporate a newer, enhanced version
of the system (e.g., includes newer sounds), so what you actually see in
the display may not always match what appears in the manual.