Filter
Top Products
Making Global Settings (System Settings)
45
Quick Guide Overview Outputting Sound Eects Saving
Pedal Settings
System MIDI/USB Appendices
Parameter Value Explanation
MIDI IN SELECT
Selecting the Connector That Will Receive MIDI Messages
This selects whether MIDI messages will be received from the MIDI IN connector or from the USB port.
USB (AUTO)
MIDI messages will be received via the USB port.
* If the USB port is not connected to a computer, MIDI messages will be received from the MIDI IN
connector.
MIDI CONNECTOR MIDI messages will be received from the MIDI IN connector.
PC OUT
Sending Program Change Messages
This setting determines whether or not Program Change messages are output when patches are switched on the GT-100.
* On the GT-100, Bank Select messages are output simultaneously with Program Change messages.
OFF Program Change messages are not output, even when patches are switched.
ON Program Change messages are simultaneously output when patches are switched.
MAP SELECT
Enabling/Disabling the Program Change Map Settings (MIDI Map Select)
This setting determines whether patches are switched according to the Program Change Map settings, or to the default settings
“Setting the Program Change Map” (p. 47).
FIX
This deactivates the Program Change Map.
Switches to the patches according to the default settings.
PROG
This activates the Program Change Map.
Switches to the patches according to the Program Change Map.
PH.LOOP OUT
Sending [PHRASE LOOP] Pedal Operations as Control Change Messages
This sets the controller number when [PHRASE LOOP] pedal switch operation data is output as Control Change messages.
OFF Control Change messages are not output.
CC#1–CC#31, CC#64–CC#95
This sets the controller number when [PHRASE LOOP] pedal operation data is output as Control
Change messages.
ACC/CTL OUT
Sending [ACCEL/CTL] Pedal Operations as Control Change Messages
This sets the controller number when [ACCEL/CTL] pedal switch operation data is output as Control Change messages.
OFF Control Change messages are not output.
CC#1–CC#31, CC#64–CC#95
This sets the controller number when [ACCEL/CTL] pedal operation data is output as Control Change
messages.
EXP OUT
Sending [EXP] Pedal Operations as Control Change Messages
This sets the controller number when [EXP] pedal operation data is output as Control Change messages.
OFF Control Change messages are not output.
CC#1–CC#31, CC#64–CC#95
This sets the controller number when [EXP] pedal operation data is output as Control Change
messages.
EXP SW OUT
Sending EXP Pedal Sw Operations as Control Change Messages
This sets the controller number when EXP PEDAL SW operation data is output as Control Change messages.
OFF Control Change messages are not output.
CC#1–CC#31, CC#64–CC#95
This sets the controller number when EXP PEDAL SW operation data is output as Control Change
messages.
SUB CTL1 OUT
Sending External Footswitch Operations as Control Change Messages
This sets the controller number when operation data from the footswitch connected to the SUB CTL 1, 2/SUB EXP jack is output as Control Change
messages.
OFF Control Change messages are not output.
CC#1–CC#31, CC#64–CC#95
This sets the controller number when SUB CTL1 pedal operation data is output as Control Change
messages.
SUB CTL2 OUT
OFF Control Change messages are not output.
CC#1–CC#31, CC#64–CC#95
This sets the controller number when SUB CTL2 pedal operation data is output as Control Change
messages.