Filter
Top Products
Outputting Sounds
26
Using the Pedal to Select the Patch
Patches are switched by selecting a “bank” (U01–U50, P01–P50) and
“number” (1–4).
* On the GT-100, you cannot switch patches in any screen other
than the Play screen. Press [EXIT] to return to the Play screen
(p. 21).
1. Select a bank.
Use the [BANK UP]/[BANK DOWN] pedals to select a bank.
2. Select a patch within the selected bank.
Use pedals [1]–[4] to select a patch within the bank you selected in
step 1.
MEMO
When selecting a patch, even if a new bank is selected, the
patch is not switched until you also choose the number. If you
want to be able to switch patches merely by selecting a dierent
bank, adjust the BANK CHG MODE (p. 41) setting.
Using the Knobs to Select a Patch
You can also use knob [1] to select a patch.
* You can change the function of the knobs (p. 41).