Filter
Top Products
Section 6 – Basic operations
06/97 – 1.00 – 6-7
3) At the punch-out point, the monitoring will go
back to off-tape (the
INPUT MONITOR
indicators
of armed tracks will go out), and when the
post-roll point is reached, the tape will rewind
to the pre-roll point.
4) The
AUTO
PUNCH
indicator will light steadily,
showing that the DA-98 is now in replay mode.
6.6.8 Replaying the punched material
1) To replay the punch-in, press the PLAY key.
Playback will start (the
REC FUNCTION
indica-
tors of the armed tracks will continue to flash).
2) At the post-roll point, the tape will
automatically rewind to the pre-roll point.
3) If you want to record the punch-in again, press
the
AUTO PUNCH
key [10] so that the indicator
flashes, and repeat the process described
above.
4) If you are satisfied with the punch-in, follow the
steps below, otherwise, press
LOC 1
to return to
the punch-in point, press the
AUTO PUNCH
key
so that the indicator flashes, and repeat the
take.
6.6.9 Exiting punch-in mode
1) Disarm any armed tracks (press the
REC
FUNCTION
switches so that the indicators go
out).
2) Press the
CLEAR
key [11].
This will exit the
AUTO
PUNCH
(or rehearsal)
mode.
The
LOC 1
and
LOC 2
keys will return to their
usual functions, but the punch points are still
retained in memory.
3) Press the
AUTO MON
key so that the indicator
goes out.
Normal monitoring modes will now be in opera-
tion (see 7, “Monitoring modes”)
NOTE
If the
AUTO PLAY
mode is active (press the
AUTO
PLAY
key [12] so that the indicator lights), playback
will start again as soon as the pre-roll point is reached.