Line 6 POD X3 Family Music Pedal User Manual


 
Controls & Connections
3•10
8
Multi-function Knobs turn any one of these knobs to adjust the
corresponding parameter in the display.
See Chapter 4 to learn about Home Page functions for these knobs.
9
Footswitches – these allow you to do the following:
Tone 2 / Hold for Dual – press to toggle between Tone 1 and Tone 2 (you’re editing
Tone 2 when the footswitch is lit). Press and hold to turn Dual Tone on or off. See
Chapter 4 for more details.
Stomp, Mod, Delay turns the Stomp, Mod, and Delay processing blocks on
or off (the blocks are on when the footswitches are lit). Double-press one of these
footswitches to tweak the block. For example, just press the Stomp footswitch two
times quickly and you’re instantly taken to the Stomp Box Edit Page. Double-press the
same footswitch again (or press the Home button) to leave the Edit Page and return
to the Home page. Chapter 5 gives you details on all the Edit Pages available.
Comp/Boost turns the Compressor processing block on or off. Double-press to
tweak the block. This footswitch can also be assigned to the Amp Model or Reverb
processing block. See the Pedal info page in Chapter 5 for more details.
Bank Up, Down – these choose amongst POD X3 Live’s 32 banks of User presets.
Once you’ve footswitched your way to a new bank, you’ll then also need to step on the
A, B, C or D footswitch to actually load a preset from that bank. (We set things up
this way so your audience won’t hear you switching through presets as you make your
way to your next bank of sounds.)
A, B, C, D – the lights on these footswitches show you which of the Presets in the
current User Bank is running. You can step on any of them to choose a different
preset.