Filter
Top Products
Reference: Configuration & Setup
6•4
Outputs Page 2: Studio/Direct Mix
DIGITAL
STUDIO/DIRECT MIX
TONE 1TONE 2PANPAN
ON ON
MATCH
STUDIO/
DIRECT
48kHz+12dB
RA TE LE VEL
FORMAT
S/PDIF
This mix provides POD’s legendary direct recording sound, ideal for connecting •
direct to a mixer, recorder, PA, or headphones for “Studio Mode” sound.
The headphone and USB 1-2 outputs always get this mix.•
For POD X3 Live and POD X3 Pro, this also always feeds the XLR Direct Outs.•
The 1/4-inch outputs can get this mix, too, when desired. (See next page.)•
Tone 1 – allows you to either turn On or Mute Tone 1.
Pan – sets the location of Tone 1 in the stereo field.
Tone 2 – allows you to turn On or Mute Tone 2.
Pan – sets the location of Tone 2 in the stereo field.
Digital – sets the signal for the digital output. There are four options:
Match Studio/Direct – Digital outputs the Tone and Pan settings as shown.•
Studio/Direct Tone 1 – Digital outputs Tone 1 only, panned center.•
Studio/Direct Tone 2 – Digital outputs Tone 2 only, panned center.•
Dry Inputs – Digital Left outputs the unprocessed input(s) to Tone 1, and Digital •
Right outputs the unprocessed input(s) to Tone 2.
Rate – affects the digital output only, setting the S/PDIF or AES/EBU signal’s sample
rate to 44.1, 48, 88.2, 96 kHz or Match Digital In.
Level – affects the digital output only, adding up to 12 dB of gain. This can be useful