Filter
Top Products
Reference: Configuration & Setup
6•3
the second Outputs page.
Studio/Direct Tone 1 – the 1/4-inch jacks output Tone 1 only, panned center, with •
Studio Mode processing.
Studio/Direct Tone 2 – the 1/4-inch jacks output Tone 2 only, panned center, with •
Studio Mode processing.
“Live” Modes (for feeding a guitar amp, without speaker/mic/room simulation, and
with a set of controls for On/Mute and Pan for Tone 1 and Tone 2 that is independent
from the Studio/Direct Mix settings)
Combo Front – use this to jack into the instrument input of a combo guitar amp.•
Combo Pwramp – use this to jack into the power amp input of a combo guitar amp.•
Stack Front – use this to jack into the instrument input of a guitar amp head with •
separate cab.
Stck PwrAmp – use this to jack into the power amp input of a guitar amp head with •
separate cab.
Lows – when Combo Front or Stack Front are chosen for Mode, this control appears
to let you lower the overall bass output of POD X3, POD X3 Live or POD X3 Pro. This
helps to counteract any bass boost you may have built into your guitar amp.
Focus – when Combo Front or Stack Front are chosen for Mode, this control appears
to let you increase the overall midrange output of POD X3, POD X3 Live or POD X3
Pro. This helps to counteract any mid cut that may be built into your guitar amp.
Highs – when Combo Front or Stack Front are chosen for Mode, this control appears
to let you lower the overall treble output of POD X3, POD X3 Live or POD X3 Pro.
Tone 1 – allows you to either turn On or Mute Tone 1, independent of the settings of
the Studio/Direct Mix that drive the XLR and other outputs.
Pan – sets the location of Tone 1 in the stereo field, independent of the settings of the
Studio/Direct Mix that drive the XLR and other outputs.
Tone 2 – allows you to turn On or Mute Tone 2, independent of the settings of the
Studio/Direct Mix that drive the XLR and other outputs.
Pan – sets the location of Tone 2 in the stereo field, independent of the settings of the
Studio/Direct Mix that drive the XLR and other outputs.