Roland HP Electronic Keyboard User Manual


 
17
Before You Begin Playing
Connecting the Headphones
The HPi-7F has two headphone jacks, two people can also use
headphones simultaneously.
1. Plug the headphones into the Phones jacks.
If headphones are connected, no sound will be output from the
HPi-7F’s speakers.
2. Use the HPi-7F’s [Volume] slider to adjust the headphone
volume (p. 16).
Cautions when Using Headphones
To prevent damage to the cord’s internal conductors, avoid rough
handling. When using headphones, mainly try to handle either the
plug or the headset.
Your headphones may be damaged if the volume of a device is already
turned up when you plug them in. Minimize the volume before you
plug in the headphones.
Excessive input will not only damage your hearing, but may also strain
the headphones. Please enjoy music at an appropriate volume.
Use headphones that have a stereo 1/4” phone plug.
Using the Headphone Hook
Whenever you are not using the headphones, you can hang them on
the headphone hook of the HPi-7F.
Wing nut
Hole
Headphone hook
Attaching the Headphone Hook
1. Press and twist the headphone hook included with the
HPi-7F into the hole in the bottom left of the HPi-7F (refer to
the gure above).
2. Turn the headphone hook wing nut to secure the
headphone hook.
NOTE
Do not hang anything other than headphones on the headphone
hook. Doing so may damage the instrument or the hook.
Using the Headphones
You can use headphones to enjoy the HPi-7F without disturbing those around you, such as at night.