Filter
Top Products
31
Performing
Adding Reverberation to the Sound
The HPi-7F can apply a reverb eect to the notes you play on the keyboard. Applying reverb adds pleasing reverberation to what you play, so it sounds
almost as if you were playing in a concert hall.
1
1. Press the [Reverb] button.
The Reverb screen will appear.
MEMO
If you press the [Reverb] button once again, the button will go out and the reverb eect will be eliminated.
Adjusting the Reverb Depth
1
2
1. Press the [Reverb] button.
The screen will indicate the reverb depth.
2. Use the cursor up/down buttons to adjust the depth.
Higher values apply deeper reverb.
MEMO
• The adjusted setting will return to its original values when you turn o the power. If you wish, you can have this setting be retained even while the
power is turned o (p. 74).
• You can’t specify the depth of the reverb eect independently for each sound. Reverb is applied at the same depth for each sound.
• The depth of the reverb eect for the song that’s playing will not change.
• The reverb eect is not applied if Twin Piano mode (p. 37) is set to “individual.”