Filter
Top Products
70
Saving User Programs
Saving a User Program Set to Memory
The 40 user programs you’ve stored in the HPi-7F can be saved as a single set of 40 user programs to USB memory or to internal memory.
MEMO
If you want to save the set to USB memory, connect your USB memory to the external memory connector before you proceed.
1. Press the [Function] button ➝ [User Program File] ➝ [O] button ➝ [Save] ➝ [O] button (p. 24).
The “User Program File” screen will appear.
2. Use the cursor up/down buttons to choose the save-destination memory, and then press the [O] button.
MEMO
If USB memory is not connected to the external memory connector, you won’t be able to choose “external memory” as the save-destination.
3. Specify a name for the User Program Set settings. Use the cursor left/right buttons to select the character that you want to
change, and use the cursor up/down buttons to change the character.
MEMO
If you don’t need to rename the user program set, simply proceed to step 4.
4. Press the right cursor button a number of times to select “Save destination.”
5. Use the cursor up/down buttons to select the save-destination number.
A user program set has already been saved for numbers at which a name is already displayed.
If you select a number at which a user program set has already been saved, the previously saved set will be erased.
If you don’t want to erase the previously saved user program set, choose a number for which “(Empty)” is displayed.
6. Press the [O] button.
The user program set will be saved to the number you specied.
NOTE
Never turn o the power or disconnect the USB memory while the screen indicates “Executing...”