Filter
Top Products
68
Recording Your Performance
Selecting the Track to Record
5.
Press the track button for the track that you want to record (i.e., the track
that you want to play yourself).
The indicator of the button you pressed will blink, and the HPi-6 enters recording-
standby mode.
Since in this example we will record the right-hand part performance, press the [4/
Right] button to make the button’s indicator blink.
To cancel recording, press the [ (Rec)] button once more and watch the indicator
goes out.
Starting the Recording
6.
Press the [ (Play/Stop)] button.
The count is played, and then recording begins.
When recording starts, the [ (Play/Stop)] and [ (Rec)] buttons’ indicators
light.
Stopping the Recording
7.
Press the [ (Play/Stop)] button.
Recording stops, and the indicators for the [ (Play/Stop)] and [ (Rec)]
buttons go out.
Listening to the Recorded Performance
8.
Press the [ (Reset)] button, then press the [ (Play/Stop)] button.
The recorded performance is played back.
When you press the [ (Play/Stop)] button, recording stops.
Only drum sets or SFX set are
recorded to the [R/Rhythm]
b
utton.
HPi-6-e.book 68 ページ ２００５年１１月１５日 火曜日 午後３時４９分