Filter
Top Products
80
Convenient Functions
Functions that Can be Selected
Using the [Menu/Lesson]
Button
Here’s how you can easily make changes such as tuning the HPi-6 or
changing the function of the pedals.
■
Making the Settings
1.
Press the [Menu/Lesson] button.
fig.d-Menu-e_45
2.
Press the cursor button to select the <Functions>,
then press the [ ] button.
3.
Press the cursor button to select the setting you
want to make.
Pressing the cursor left or right button switches the
selected setting horizontally; pressing the cursor up or
down button switches the selected setting vertically.
fig.Menu1-e
4.
Press the [ ] button.
The screen for the selected function appears.
5.
Press the cursor up or down button to change the
setting.
6.
When you have finished making the settings, press the
[] button one or more times to return to the Notation
screen.
Tone and Performance Settings
The HPi-6 is capable of reproducing a variety of the acoustic piano’s
distinctive characteristics. You can also adjust these to suit your own
taste and style.
Refer to “Making the Settings” (previous section) for the procedure.
NOTE
This setting is valid when some piano sounds are selected.
■
Opening/Closing the Piano Lid (Lid)
This simulates the actual changes in sound that occur when the lid of
a grand piano is set at different heights.
■
Adjusting Resonance when the
Damper Pedal is Depressed
(Damper Resonance)
You can adjust this resonance (Damper Resonance) when the
damper pedal is depressed.
On an acoustic piano, holding down the damper pedal will allow the
remaining strings to resonate in sympathy with the sounds that you
played from the keyboard, adding a rich resonance. The resonance is
called “Damper Resonance.”
■
Changing How Rapidly Sounds Are
Expressed According to the Force Used
to Play the Keys (Hammer Response)
You can adjust the timing with which sounds are produced
according to the force used to play the keys.
When a key is pressed on an acoustic piano, it causes a hammer to
move and strike the strings, producing sound. The hammers move
more slowly when the keys are played gently, meaning that sounds
are produced just slightly later than when you play the keyboard
with greater force.
If the Hammer Response function is turned on, the time between the
moment you press a key until the sound is heard will change
depending on the strength with which you play. As you play more
softly, this time will become longer.
Press the cursor up or
down button
The selected setting is
switched vertically.
Press the cursor left or
right button
The selected setting is switched horizontally.
If there are any pages before or after the current page,
pressing the cursor button one or more times will
switch the display to such pages.
Adjusting the Piano Sounds
(Piano Setting)
Setting
Explanation
1–6
As the value decreases, the lid seems to close
more, producing a softer sound. Increasing
the value opens the lid more, producing a
brighter sound.
Setting
Explanation
Off, 1–10
Increasing the value will increase the amount
of effect. When set to Off, no Damper
Resonance is applied.
HPi-6-e.book 80 ページ ２００５年１１月１５日 火曜日 午後３時４９分