Roland HPi-6 Electronic Keyboard User Manual


 
74
Saving the Performance
Preparations for Saving a Song
When saving to external memory, connect the external memory to the external
memory connector.
1.
Press the [Menu/Lesson] button.
2.
Press the cursor button to select <Functions>, then press the [ ]
button.
3.
Press the cursor button to select <File>, then press the [ ] button.
4.
Press the cursor left button to select <Save>, then press the [ ]
button.
fig.d-File1-e_50
Saving Songs
A recorded performance is discarded when you switch off the power or choose another song. You can store
recorded song data to optional external memory and to the “Favorites.” Be sure to save important songs to
external memory or “Favorites.”
What are “Favorites?”
You can register songs you are currently practicing or particularly like to
“Favorites,” allowing you to select these songs easily.
You can register songs recorded with the HPi-6 and songs saved to external
memory to the “Favorites.” When you register a song on an external memory
to “Favorites,” you can then play back the song without connecting the
external memory to the external memory connector.
If a recorded performance is saved to “Favorites,” the performance won’t be
erased when the power is turned off.
If connecting an optional
floppy disk drive, substitute
“floppy disk” wherever the
term “external memory”
appears here.
When using a new storage
media, first initialize (format)
the external memory on the
HPi-6. Take a look at
“Formatting Media (Format)”
(p. 73).
NOTE
Some commercially available
music files cannot be saved
b
ecause they are copy
protected.
When saving to floppy disks,
first check to make sure that
the floppy disk’s protect tab is
set to the “Write” position.
If not handled with care, a
floppy disk and an external
memory can be damaged, or
the data on it become
corrupted, making playback
impossible. We recommend
saving your songs on two
different media.
When you want to clear all of
the content saved to the
“Favorites” and restore the
settings to the original factory
condition on the HPi-6, refer to
“Formatting the User Memory
(Initialize User Memory)” (p.
87).
HPi-6-e.book 74 ページ 2005年11月15日 火曜日 午後3時49分