Filter
Top Products
73
Saving the Performance
1.
Connect the external memory to the External Memory connector.
2.
Press the [Menu/Lesson] button.
3.
Press the cursor button to select <Functions>, then press the [ ]
button.
4.
Press the cursor button to select <File>, then press the [ ] button.
The “File” screen appears.
5.
Press the cursor right button to select <Format>, then press the [ ]
button.
fig.d-format-e_50
6.
Press the cursor right button to select <OK>, then press the [ ]
button.
fig.d-FormatMsg-e_50
Initialization of the external memory begins.
When initialization is completed, you’re returned to the “File” screen.
Formatting Media (Format)
The process of preparing external memory or floppy disks so that they can be used with the HPi-6 is called
“initialization” (formatting).
In certain cases, particularly with floppy disks, the media is formatted for a specific type of device. If the
media format does not match the HPi-6’s, you will not be able to use that media with the HPi-6.
If connecting an optional
floppy disk drive, substitute
“floppy disk” wherever the
term “external memory”
appears here.
NOTE
When an external memory is
initialized, all of the data
saved on the external
memory is erased. If you’re
formatting a used external
memory for reuse, be sure to
check first to make sure the
external memory doesn’t
contain any data you don’t
want to lose.
NOTE
You cannot select <Format>
without any external memory
connected to the External
Memory connector.
When initializing floppy disks,
check to make sure that the
disk’s write protect tab is slid
to the “write” position.
NOTE
Do not remove the storage
media until the initialization
is completed.
NOTE
If “Error” appears on screen,
take a look at “Error Message”
(p. 104).
HPi-6-e.book 73 ページ ２００５年１１月１５日 火曜日 午後３時４９分