Filter
Top Products
114
Chapter 5 Recording and Saving the Performance
Chapter 5
■
Formatting Media (Format)
The process of preparing external memory or disks so that they can be used with the
KR is called “initialization” (formatting).
In certain cases, particularly with floppy disks, the media is formatted for a specific
type of device. If the media format does not match the KR’s, you will not be able to
use that media with the KR.
fig.panel4-3
1.
Connect the external memory to the external memory port.
2.
Press the [Song/File] button.
3.
Touch <File>.
A “File screen” like the one below appears.
fig.d-songfile.eps_60
4.
Touch <Format Media>.
The following screen appears.
fig.d-format.eps_60
Press the [Exit] button to go back to the previous screen.
NOTE
When an external memory is
initialized, all of the data
saved on the external
memory is erased. If you’re
formatting a used external
memory for reuse, be sure to
check first to make sure the
external memory doesn’t
contain any data you don’t
want to lose.
NOTE
When initializing floppy disks,
check to make sure that the
disk’s write protect tab is slid
to the “write” position(p. 7).
KR117_r_e.book 114 ページ ２００５年１１月８日 火曜日 午後４時２０分