Filter
Top Products
37
Chapter 1 Performance
Chapter 1
■
Selecting the Part for the Effect
1.
Press the [Surround/Reverb] button and watch the indicator light up.
2.
Touch <Surround>.
3.
On the Surround Screen, press the [Option] button.
The following screen appears.
fig.d-adv3d.eps_60
4.
Touch the icon to switch individual parts on or off.
When you press the [Exit] button, the Surround effect is activated, and you return to
the previous screen.
5.
Touch a part’s icon to switch the surround on and off.
The sounds of parts set to ON are played from the external speaker and the KR’s
internal speaker. Parts set to OFF are played only from the KR’s speaker.
When you press the [Exit] button, the surround effect is activated, and you return to
the previous screen.
■
Selecting the Tone to Which the Effect is Applied
With “Keyboard” in Surround set to On, you can select the parts to which the
surround effect is to be applied.
1.
Press the [Surround/Reverb] button and watch the indicator light up.
2.
Touch <Surround> to display the Surround screen.
3.
On the Surround Screen, press the [Option] button.
Touch to display the following screen.
OFF
ON
No surround effect is applied,
even if the Type icon indicates
“On,” if all parts are switched
off.
When you select the
<Surround>, you can adjust
the volume of the external and
built-in speakers (p. 38).
KR117_r_e.book 37 ページ ２００５年１１月８日 火曜日 午後４時２０分